Installation Using Docker on Production Server
This guide shows you how to install and configure production server applications needed for your project based on Shopsys Framework.
We do not want to setup each application manually and we want to have separate runtime for each one. We use docker containers, built from docker images and php source code from git repository to have everything setup correctly and fast. As we do not want to lose data after deploying a new version of the project, we install all the data storages (postgres, elasticsearch, redis) natively. This guide also shows you how to setup first built image of the project on production server and how to deploy new versions of the project.
Before deploying, don't forget to adjust your configuration to your expected workload and hardware. All values in configuration files are set to run on very limited hardware by default.
CentOS is very common OS for production servers so we use it on our production server.
It is very important to have our containers inaccessible from outside.
For that purpose we need to update
firewalld configuration with these commands,
because Docker overrides
firewalld and publishes ports on the server by default.
firewall-cmd --permanent --direct --add-chain ipv4 filter DOCKER firewall-cmd --permanent --direct --add-rule ipv4 filter DOCKER 0 ! -s 127.0.0.1 -j RETURN
Let's presume that we want to have our site running on
HTTPS protocol and everything that concerns domain and its
certificates is already setup.
Nginx atricle provides us with some helpful information about the setup.
Only thing that is missing is to connect the domain to application that runs in docker containers via port 8000 on 127.0.0.1 ip address.
First we need to allow Nginx to connect to sockets by executing a command in shell console.
setsebool httpd_can_network_connect on -P
Then we add location block into
/etc/nginx/conf.d/<YOUR_DOMAIN_HERE>.conf into server block so the config looks like this.
We update configuration of natively installed Nginx.
service nginx restart
maintenance.html will be exported into
php-fpm container later.
We need PostgresSQL in version 12.1 installed. To get this done we need to add repository to our server and then install PostgresSQL server with PostgresSQL client.
yum install https://download.postgresql.org/pub/repos/yum/reporpms/EL-7-x86_64/pgdg-redhat-repo-latest.noarch.rpm yum install postgresql12-server postgresql12 postgresql12-contrib
Next we initialise PostgresSQL database.
We need to allow access to database from docker network that will operate on 192.168.0.1 subnet by adding one line into the config file.
echo host all all 192.168.0.1/16 md5 >> /var/lib/pgsql/12/data/pg_hba.conf
We edit configuration file
/var/lib/pgsql/12/data/postgresql.conf of postgresql to match application needs based on our postgres.conf.
We also allow to establish connection via localhost and 192.168.0.1 subnet by modifying one line in
listen_addresses = '0.0.0.0'
Now we register and launch PostgresSQL server as a service.
systemctl start postgresql-12 systemctl enable postgresql-12
Next with help of default postgres administration user we create new database user with login root. You will be prompted to enter password for newly created user root.
sudo -u postgres createuser --createdb --superuser --pwprompt root
Now we need to allow connection between docker containers and database via local network and PostgresSQL port.
cat <<EOT > /etc/firewalld/services/postgresql.xml <?xml version="1.0" encoding="utf-8"?> <service> <short>PostgreSQL</short> <description>PostgreSQL Database Server</description> <port protocol="tcp" port="5432"/> <destination ipv4="192.168.0.1/16"/> </service> EOT firewall-cmd --permanent --zone=public --add-service=postgresql firewall-cmd --reload
For storing cache and sessions we need to install Redis server. Also we want it running as a service.
In addition we want redis server to operate also on 192.168.0.1 subnet so we modify one line in configuration file that is set by default in folder
After configuration change, configuration need to be reloaded by service restart.
service redis_6379 restart
Now we just need to allow communication between docker containers and Redis server.
cat <<EOT > /etc/firewalld/services/redis.xml <?xml version="1.0" encoding="utf-8"?> <service> <short>Redis</short> <description>Cache tool.</description> <port protocol="tcp" port="6379"/> <destination ipv4="192.168.0.1/16"/> </service> EOT firewall-cmd --permanent --zone=public --add-service=redis firewall-cmd --reload
If you are using multiple Shopsys Framework instances on same machine, you might want to prefix your entries names in Redis.
You can do that by setting environment variable
docker-compose.yml file for
First we need to install Java SDK environment.
yum install java-1.8.0-openjdk
Next we install elasticsearch and allow connecting to it via local network.
cat <<EOT > /etc/firewalld/services/elasticsearch.xml <?xml version="1.0" encoding="utf-8"?> <service> <short>Elasticsearch</short> <description>Elasticsearch is a distributed, open source search and analytics engine, designed for horizontal scalability, reliability, and easy management.</description> <port protocol="tcp" port="9300"/> <port protocol="tcp" port="9200"/> <destination ipv4="192.168.0.0/16"/> </service> EOT firewall-cmd --permanent --zone=public --add-service=elasticsearch firewall-cmd --reload
We will also make elasticsearch server listen on 192.168.0.1 subnet by modifying one line in
We also need to restart service so the new configuration is applied.
service elasticsearch restart
Deployment On Production Server¶
Our server is setup for production so we want to be able to deploy changes that we made in git repository of the project to production server.
First we need to build image of the project and then deploy it as
php-fpm docker container.
Docker Image Building¶
We can do the whole process manually of write the commands into some deployment application that can help with the automation. We need to clone project repository with the specific tag or commit hash into some workspace.
git clone <YOUR_PROJECT_REPOSITORY> (e.g. https://github.com/shopsys/project-base.git) cd project-base git checkout $commit_hash
Then we setup environment for building the image with the correct data for production server. Now we create configuration file for domains.
echo $'domains: - id: 1 name: <YOUR_DOMAIN_NAME_HERE> locale: en ' > config/domains.yaml
For each domain we need to create config with domain url.
echo $'domains_urls: - id: 1 url: https://<YOUR_DOMAIN_HERE> ' > config/domains_urls.yaml
Then we check whether ENV variable
.env.local is set correctly.
After the project is setup correctly, we launch the build of php-fpm container by docker build command that will build image with composer, npm packages and created assets.
docker build \ -f ./docker/php-fpm/Dockerfile \ --target production \ -t production-php-fpm \ --compress \ .
f parameter we set path to Dockerfile that builds image.
t parameter we set the name of built image.
During the build of
production target, there will be installed 3-rd party software as dependencies of Shopsys Framework by Dockerfile, composer and npm with licenses that are described in document Open Source License Acknowledgements and Third-Party Copyrights
If we are building the image on different server than production server, we can push built image into docker registry of production server via ssh.
-oStrictHostKeyChecking=no argument to have ssh connection without the prompt that asks about adding target server record into
known_hosts ssh configuration.
We also want to establish connection to the server without prompting for password so we will use key exchange method.
Before uploading the built image we perform cleanse of old images from the registry.
ssh -oStrictHostKeyChecking=no -i <PRIVATE_KEY_PATH> root@<YOUR_DOMAIN_HERE> docker image prune -f
Then we can upload built image into registry of our server.
docker save production-php-fpm | gzip | ssh -oStrictHostKeyChecking=no -i <PRIVATE_KEY_PATH> root@<YOUR_DOMAIN_HERE> 'gunzip | docker load'
First Setup Deploy¶
We have setup server and also built image from project git repository in the server docker registry so we are now able to deploy application and setup it with base data.
We log into the server using ssh.
Now we need to copy
docker-compose-prod-deploy.yml.dist into folder on the production server as
After the image is in the registry of the production server we create docker containers and build application for production with clean DB and base data.
We use parameter
-p to specify the name of the project and prefix for the volumes so these will be easily accessible.
There are named volumes created under path
/var/lib/docker/volumes/ and one persisted folder
production-content for all uploaded images and generated files that should not be removed.
We create persisted folder with correct owner id
33 so internal docker
php-fpm container user has access into the folder.
mkdir /var/www/production-content chown -R 33:33 /var/www/production-content
and start containers with docker-compose.
cd <PROJECT_ROOT_PATH> #(e.g. /var/www/html) docker-compose -p production up -d
Now we export maintenance page from
docker cp production-php-fpm:/var/www/html/app/maintenance.html /usr/share/nginx/html
Then we create database and build the application.
docker-compose -p production exec php-fpm ./phing db-create build-new
In this step you were using multiple Phing targets.
More information about what Phing targets are and how they work can be found in Console Commands for Application Management (Phing Targets)
During the execution of
build-new target there will be installed 3-rd party software as dependencies of Shopsys Framework by composer and npm with licenses that are described in document Open Source License Acknowledgements and Third-Party Copyrights
Now the application should be running.
We want to setup scheduler for execution of cron jobs by adding one line into
Cron job is executed every 5 minutes in
php-fpm container under
root user privileges.
*/5 * * * * root /usr/bin/docker exec production-php-fpm php phing cron
Since web application is running we can go to administration and change passwords for default administrators.
superadmin and password
admin123 we can do it via these urls:
Now we go to
/admin/dashboard/ and fulfill all requests that are demanding for us by red colored links.
If you want to use the frontend API, you have to generate a pair of keys at the first time you deploy.
You can do this with
./phing frontend-api-enable target or, if
packages/frontend_api.yaml configuration file exist, with
./phing frontend-api-generate-new-keys target.
The keys are stored in the
It is up to you to make sure that the keys in this folder remain for the next deploy.
We have running production shop project and we want to update it with some changes that were made in the project git repository. We need to follow some steps that will change old version of the shop for the new one.
To preserve created data we need to use phing target
build-deploy-part-2-db-dependent for building application environment of
php-fpm container, maintenance page is needed if there exist unapplied database migrations.
With each update of master branch in our repository we need to rebuild image based on Docker Image Building section.
We log into the server using ssh.
Now we are logged in production server and we start to deploy newly built production image.
cd <PROJECT_ROOT_PATH> (e.g. /var/www/html) # make sure that container for building the application image is cleared docker rm -f build-php-fpm-container # launch container for building the application image docker run --detach --name build-php-fpm-container \ --add-host redis:192.168.0.1 --add-host postgres:192.168.0.1 --add-host elasticsearch:192.168.0.1 --add-host smtp-server:192.168.0.1 \ --network production_shopsys-network \ production-php-fpm \ php-fpm # turn on maintenance page on actual running production container docker exec production-php-fpm php phing maintenance-on # launch build part2 that could have impact on actual running production container docker exec build-php-fpm-container php phing build-deploy-part-2-db-dependent # save the current state of container into the image production-php-fpm that is refered in php-fpm service of docker-compose.yml file docker commit build-php-fpm-container production-php-fpm # remove actual running production container with the web volume that is shared with webserver container docker-compose -p production rm -fs php-fpm webserver docker volume rm -f production_web-volume # recreate production container with webserver container with new web folder docker-compose -p production up -d --force-recreate webserver # remove container for building the application image docker rm -f build-php-fpm-container
build-deploy-part-2-db-dependent phing target
elasticsearch-index-migrate is called and can cause error when you change the type of field to another (eg. you change it from
If you need to make this change, please add new field with the correct type and delete the old field instead
If you need to have freshly exported data in Elasticsearch after deploy, you can call phing target
If you need to inspect your application logs, use
docker-compose logs command.
For more information about logging see the separate article.
Now we have running project based on Shopsys Framework docker containers. We know how to deploy changes that were made into project git repository. We have setup server with natively installed applications for storing persisted data on production server so there is no risk of loosing data with new deploys of the project.